Pvc Laminate

Thickness : 1.4mm ( ± 10%)

Range : These laminates come in a wide range of designs & colours.
Adhesive :These laminates are easy to apply with the standard laminating system, including most of the conventional adhesive normally used with plastic laminates such as many water based and solvent based. We do not recommend the use of heat activated adhesives.
Adhesive : These laminates are easy to apply with the standard laminating system, including most of the conventional adhesive normally used with plastic laminates such as many water based and solvent based. We do not recommend the use of heat activated adhesives.
Lamination : Proper substrates must be used and careful bonding procedures must be observed. Substrates should be of good quality plywood, high density particle board, or high quality fiber board. The face of the substrate must be smooth and free of grease, wax, dust, chips and other foreign matter. We DO NOT recommend any kind of coat like PU base, melamine, lamination (wax) on our products. These products are manufactured from natural resources. Therefore this application will spoil the originality and natural beauty of the laminate sheet.

Cutting & Machining : These laminates can be cut, routed and drilled, with most standard wood working tools or equipments. All blades must be sharp. To remove any burrs that may occur in the cutting process, we recommend the use of smooth file to feather all corner edges.
Bending and Forming : These laminates can be bend and all radius bending should be handled in the same manner as all grades of non post forming decorative laminates.
Kindly use V-Groove cutter to bend the sheets at 90° For any difficulty please contact us.
Maintenance : Any cleaning agent containing acids, alkalis or abrasive should not be used to clean the laminate. Exposure to sunlight should be avoided.
Note : We warrants that all its products are free from manufacturing defects and perfectly fit for use in normal conditions. In case of any claim, the liability the company's is however limited to the cost of the product only. These may be batch to colour variation. The sample swatches only represent the designs, colours and finish. They do not represent the actual thickness.
KINDLY REMOVE THE PROTECTIVE FILM WITHIN 7 DAYS OF INSTALATION